Teknik Analiz Dünyasına Hoşgeldiniz

Paylaşmak Güzeldir.

  • DİKKAT: Formüller, Sistemler sadece eğitim amaçlıdır. Alım satım, olası anapara kaybı ve diğer kayıplar dahil olmak üzere "YÜKSEK RİSK içerir.
  • Mucize teknik gösterge yoktur, sadece doğru veya yanlış kullanılan göstergeler vardır.

Hareketli Ortalama Dynamic Multiple Time Frames

Hareketli Ortalamalar Göstergeler arasında en çok kullanılan indikatördür. Trend takip eden özelliği bulunmakla birlikte son geçmişte kalan belli bir zaman diliminin ortalaması alınarak, şuan ki fiyatın trende ne derece uzak olduğunu gösterir.

algoritma

e iπ +1=0
Katılım
23 Eki 2020
Mesajlar
1,353
Puanları
63
Here are the formulas described in the 1999 bonus issue of "Technical Analysisof Stocks & Commodities" magazinein the article "Dynamic Multiple Time Frames", p 45. All formulas arewritten to use daily data.
The lines are plotted as described in the article, with the fixed linesonly changing their values on the first day of each week.
A sixth formula, Tendency, was added to indicate which way the pricewilltend to move,
based on the relationship between the Friday close and the fixed balancepoint.
This formula plots a value on Thursday and on Friday just in case Fridayis a market holiday.
On every trading week which includes Friday data, ignore the Thursdayvalue.
A value of 1 means prices will tend up first and a value of -1 meanstheywill tend down. Variables were used in places to simplify the formulas and to allow the referencing of certain values in formulas that plot multiple lines.​

Dynamic Balance Point
Ref( HHV(H,5)+LLV(L,5)+C, -1)/3

Dynamic BP Steps
WBPS:= Ref( (HHV(H,5)+LLV(L,5)+C)/3,-1);
( WBPS + Ref(WBPS,-5) + Ref(WBPS,-10) + Ref(WBPS,-15) + Ref(WBPS,-20) ) / 5

Fixed Balance Point
day:=DayOfWeek();
FBC:= If(day=1,
If(BarsSince(day=1)>5,
Ref( HighestSince(1,day=2,H) + LowestSince(1,day=2,L)+C,-1)/3,
Ref( HighestSince(1,day=1,H) + LowestSince(1,day=1,L)+C,-1)/3),
If(day=2 AND Ref(day,-1)>1,
If(BarsSince(day=1)>5,
Ref( HighestSince(1,day=2,H) + LowestSince(1,day=2,L)+C,-1)/3,
Ref( HighestSince(1,day=1,H) + LowestSince(1,day=1,L)+C,-1)/3),0));
ValueWhen(1,FBC>0,FBC)​

Support & Resistance
day:=DayOfWeek();
WR:= If(day=1,
If(BarsSince(day=1)>5,
Ref( HighestSince(1,day=2,H) - LowestSince(1,day=2,L),-1),
Ref( HighestSince(1,day=1,H) - LowestSince(1,day=1,L),-1)),
If(day=2 AND Ref(day,-1)>1,
If(BarsSince(day=1)>5,
Ref( HighestSince(1,day=2,H) - LowestSince(1,day=2,L),-1),
Ref( HighestSince(1,day=1,H) - LowestSince(1,day=1,L),-1)),0));
WRV:= ValueWhen(1,WR>0,WR);
T1:=Fml("Fixed Balance Point") + (WRV*.5);
T2:=Fml("Fixed Balance Point") + (WRV*.618);
B1:=Fml("Fixed Balance Point") - (WRV*.5);
B2:=Fml("Fixed Balance Point") - (WRV*.618);
T1;
T2;
B1;
B2

Weekly BP Steps
(Peak(1,FmlVar("Fixed Balance Point","FBC"),1) + Peak(2,FmlVar("Fixed Balance Point","FBC"),1) +
Peak(3,FmlVar("Fixed Balance Point","FBC"),1)+
Peak(4,FmlVar("Fixed Balance Point","FBC"),1)+
Peak(5,FmlVar("Fixed Balance Point","FBC"),1)) / 5

Tendency
If(DayOfWeek()=4 OR DayOfWeek()=5, If((HighestSince(1,Cross(3,DayOfWeek()),H)+
LowestSince(1,Cross(3,DayOfWeek()),L)+C)/3<C,1,-1),0)​

Source / From:
 

Forumda daha fazla yararlanmak için giriş yapın yada üye olun!

Forumdan daha fazla yararlanmak için giriş yapın veya kayıt olun!

Kayıt ol

Forumda bir hesap oluşturmak tamamen ücretsizdir.

Şimdi kayıt ol
Giriş yap

Eğer bir hesabınız var ise lütfen giriş yapın

Giriş yap