Teknik Analiz Dünyasına Hoşgeldiniz

Paylaşmak Güzeldir.

  • DİKKAT: Formüller, Sistemler sadece eğitim amaçlıdır. Alım satım, olası anapara kaybı ve diğer kayıplar dahil olmak üzere "YÜKSEK RİSK içerir.
  • Mucize teknik gösterge yoktur, sadece doğru veya yanlış kullanılan göstergeler vardır.

İndikatör Hilbert Squelch Indicator by John Ehlers

Teknik analizde fiyatın yönü veya trendin devamıyla ilgili fikir veren matematiksel modellerdir. İndikatörlerin Türkçe karşılığı göstergedir.

algoritma

e iπ +1=0
Katılım
23 Eki 2020
Mesajlar
1,353
Puanları
63
In his article "Squelch Those Whipsaws" John Ehlers introduces the Squelch Control indicator as a paintbar. To create this in MetaStock 6.52 or higher select Indicator Builder from the Toolsmenu and enter the following new formulas. Each formula must be createdseparately and must be named exactly as it appears below.
The formulas can also be downloaded from http://www.equis.com/customer/support/formulas/. Note that all of the following formulas are the same formulas referencedfrom his article in the May 2000 Traders Tip, with the exception of the Expert Advisor highlight. If you have downloaded and installed the May 2000 formulas you will be asked to overwrite the existing formulas when installing these formulas. If you do not wish to overwrite them do not download theformula file, instead refer to the instructions below for creating only theExpert Advisor formula.
If you are using MetaStock version 7 or higher follow these instructions:
Click here to download the self extracting formula file to a temp folder, double click on the downloaded file to start the importing process. After the import has finished locate the formulas in MetaStock. If you are using
MetaStock version 6.52 use these instructions:
Click here to download the Sept2000Formulas652.exe file into a temp folder
Double-click on the downloaded file to extract the MS65FORM.DTA and MS65EXPT.DTA files.
Run MetaStock. Choose Expert Advisor from the Tools menu. Click the Organizer button to launch the Formula Organizer Wizard. Follow the on-screen instructions.
After the formulas have been imported simply attach the "Squelch Threshold" expert to your chart.​

Hilbert cycle period - 1a
value1:=((H+L)/2) - Ref(((H+L)/2),-6);
value2:= Ref(value1,-3);
value3:=0.75*(value1-Ref(value1,-6)) + 0.25*(Ref(value1,-2)-Ref(value1,-4));
inphase:= 0.33 * value2 + (0.67 * PREV);
quad:= 0.2 * value3 + ( 0.8 * PREV);
p1:=Atan(Abs(quad+Ref(quad,-1)),Abs(inphase+Ref(inphase,-1)));
phase:=If(inphase<0 AND quad>0, 180-p1,
If(inphase<0 AND quad<0, 180+p1,
If(inphase>0 AND quad<0, 360-p1,p1)));
dp:=If(Ref(phase,-1)<90 AND phase>270, 360+Ref(phase,-1)-phase,Ref(phase,-1)-phase);
dp2:=If(dp < 1, 1,
If(dp > 60, 60, dp));
dp2

H cycle count 1a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,6)>=360 AND Sum(value,5)<360 ,6,0) +
If(Sum(value,7)>=360 AND Sum(value,6)<360 ,7,0) +
If(Sum(value,8)>=360 AND Sum(value,7)<360 ,8,0) +
If(Sum(value,9)>=360 AND Sum(value,8)<360 ,9,0) +
If(Sum(value,10)>=360 AND Sum(value,9)<360 ,10,0) +
If(Sum(value,11)>=360 AND Sum(value,10)<360 ,11,0) +
If(Sum(value,12)>=360 AND Sum(value,11)<360 ,12,0) +
If(Sum(value,13)>=360 AND Sum(value,12)<360 ,13,0) +
If(Sum(value,14)>=360 AND Sum(value,13)<360 ,14,0) +
If(Sum(value,15)>=360 AND Sum(value,14)<360 ,15,0)

H cycle count 2a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,16)>=360 AND Sum(value,15)<360 ,16,0) +
If(Sum(value,17)>=360 AND Sum(value,16)<360 ,17,0) +
If(Sum(value,18)>=360 AND Sum(value,17)<360 ,18,0) +
If(Sum(value,19)>=360 AND Sum(value,18)<360 ,19,0) +
If(Sum(value,20)>=360 AND Sum(value,19)<360 ,20,0) +
If(Sum(value,21)>=360 AND Sum(value,20)<360 ,21,0) +
If(Sum(value,22)>=360 AND Sum(value,21)<360 ,22,0) +
If(Sum(value,23)>=360 AND Sum(value,22)<360 ,23,0) +
If(Sum(value,24)>=360 AND Sum(value,23)<360 ,24,0) +
If(Sum(value,25)>=360 AND Sum(value,24)<360 ,25,0)

H cycle count 3a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,26)>=360 AND Sum(value,25)<360 ,26,0) +
If(Sum(value,27)>=360 AND Sum(value,26)<360 ,27,0) +
If(Sum(value,28)>=360 AND Sum(value,27)<360 ,28,0) +
If(Sum(value,29)>=360 AND Sum(value,28)<360 ,29,0) +
If(Sum(value,30)>=360 AND Sum(value,29)<360 ,30,0) +
If(Sum(value,31)>=360 AND Sum(value,30)<360 ,31,0) +
If(Sum(value,32)>=360 AND Sum(value,31)<360 ,32,0) +
If(Sum(value,33)>=360 AND Sum(value,32)<360 ,33,0) +
If(Sum(value,34)>=360 AND Sum(value,33)<360 ,34,0) +
If(Sum(value,35)>=360 AND Sum(value,34)<360 ,35,0)

Hilbert cycle period - final-a
c1:= Fml( "H cycle count 1a") + Fml( "H cycle count 2a") + Fml( "Hcycle count 3a") ;
c2:=If(c1=0,PREV,c1);
(0.25*c2) + (0.75*PREV)​

Source / From:
 

Forumda daha fazla yararlanmak için giriş yapın yada üye olun!

Forumdan daha fazla yararlanmak için giriş yapın veya kayıt olun!

Kayıt ol

Forumda bir hesap oluşturmak tamamen ücretsizdir.

Şimdi kayıt ol
Giriş yap

Eğer bir hesabınız var ise lütfen giriş yapın

Giriş yap